ASTM A453 Grade 660 Class D API 6A Tap End Stud Bolt

For products monogrammed per API 6A 21st Edition, all closure bolting shall be qualified and manufactured in accordance with API 20F (Corrosion-Resistant Bolting Requirements).

API 6A Tap End Stud Bolt Length for 6B Flange Connectors with "R" & "RX" Gaskets

API 6A Tap End Stud Bolt Length for 6B Flange Connectors with R & RX Gaskets
Flange Size Size and Pressure Bolt and Thread Tap End Length* Nut End Length Length**
2 1/16 2000 5/8 - 11 UNC 0.761 1.563 3.625
2 1/16 3000 7/8 - 9 UNC 1.042 2.188 4.625
2 1/16 5000 7/8 - 9 UNC 1.042 2.188 4.625
2 9/16 2000 3/4 - 10 UNC 0.900 1.875 4.000
2 9/16 3000 1 - 8 UNC 1.188 2.500 5.125
2 9/16 5000 1 - 8 UNC 1.188 2.500 5.125
3 1/8 2000 3/4 - 10 UNC 0.900 1.875 4.1 25
3 1/8 3000 7/8 - 9 UNC 1.042 2.188 4.625
3 1/8 5000 1 1/8 - 8 UN 1.313 2.813 5.625
4 1/16 2000 7/8 - 9 UNC 1.042 2.188 4.625
4 1/16 3000 1 1/8 - 8 UN 1.313 2.813 5.500
4 1/16 5000 1 1/4 - 8 UN 1.438 3.1 25 6.125
5 1/8 2000 1 - 8 UNC 1.188 2.500 5.250
5 1/8 3000 1 1/4 - 8 UN 1.438 3.1 25 6.000
5 1/8 5000 1 1/2 - 8 UN 1.688 3.750 7.375
7 1/16 2000 1 - 8 UNC 1.188 2.500 5.375
7 1/16 3000 1 1/8 - 8 UN 1.313 2.813 5.875
7 1/16 5000 1 3/8 - 8 UN 1.563 3.438 7.500
9 2000 1 1/8 - 8 UN 1.313 2.813 5.875
9 3000 1 3/8 - 8 UN 1.563 3.438 6.750
9 5000 1 5/8 - 8 UN 1.813 4.063 8.500
11 2000 1 1/4 - 8 UN 1.438 3.1 25 6.500
11 3000 1 3/8 - 8 UN 1.563 3.438 7.000
11 5000 1 7/8 - 8 UN 2.063 4.688 9.625
13 5/8 2000 1 1/4 - 8 UN 1.438 3.1 25 6.625
13 5/8 3000 1 3/8 - 8 UN 1.563 3.438 7.375
16 3/4 2000 1 1/2 - 8 UN 1.688 3.750 7.500
16 3/4 3000 1 5/8 - 8 UN 1.813 4.063 8.375
21 1/4 2000 1 5/8 - 8 UN 1.813 4.063 8.375
20 3/4 3000 2-8 UN 2.188 5.000 10.125
  • FOOTNOTES* Tolerance on tap end thread length: + 0.063/− 0 in.** Tolerance on t ap end stud length: + 0.1 25/− 0 in.

API 6A Tap End Stud Bolt Length for 6BX Studded Flange Connectors

API 6A Tap End Stud Bolt Length for 6BX Studded Flange Connectors
Flange Size and Pressure Bolt Size and Thread Tap End Length * Nut End Length Length ** Flange Size and Pressure Bolt Size and Thread Tap End Length * Nut End Length Length **
1 13/16 10,000 3/4- 10 UNC 0.900 1.875 3.750 11 10,000 13/4- 8 UN 1.938 4.375 9.750
1 13/16 15,000 7/8 - 9 UNC 1.042 2.188 4.1 25 11 15,000 2-8 UN 2.188 5.000 12.000
1 13/16 20,000 1 - 8 UNC 1.188 2.500 5.125 11 20,000 23/4- 8 UN 2.938 6.875 15.000
2 1/16 10,000 3/4- 10 UNC 0.900 1.875 3.875 13 5/8 5000 1 5/8 - 8 UN 1.813 4.063 8.375
2 1/16 15,000 7/8 - 9 UNC 1.042 2.188 4.375 13 5/8 10,000 1 7/8 - 8 UN 2.063 4.688 11.000
2 1/16 20,000 1 1/8 - 8 UN 1.313 2.813 5.750 13 5/8 15,000 2 1/4 - 8 UN 2.438 5.625 13.250
2 9/16 10,000 7/8 - 9 UNC 1.042 2.188 4.375 13 5/8 20,000 3-8 UN 3.188 7.500 18.1 25
2 9/16 15,000 1 - 8 UNC 1.188 2.500 4.875 16 3/4 5000 1 7/8 - 8 UN 2.063 4.688 9.500
2 9/16 20,000 1 1/4 - 8 UN 1.438 3.1 25 6.250 16 3/4 10,000 1 7/8 - 8 UN 2.063 4.688 11.000
3 1/16 10,000 1 - 8 UNC 1.188 2.500 5.000 18 3/4 5000 2-8 UN 2.188 5.000 11.250
3 1/16 15,000 1 1/8 - 8 UN 1.313 2.813 5.500 18 3/4 10,000 2 1/4 - 8 UN 2.438 5.625 14.000
3 1/16 20,000 13/8- 8 UN 1.563 3.438 6.750 18 3/4 15,000 3-8 UN 3.188 7.500 16.750
4 1/16 10,000 1 1/8 - 8 UN 1.313 2.813 5.750 21 1/4 5000 2-8 UN 2.188 5.000 11.750
4 1/16 15,000 13/8- 8 UN 1.563 3.438 6.500 21 1/4 10,000 2 1/2- 8 UN 2.688 6.250 15.125
4 1/16 20,000 13/4- 8 UN 1.938 4.375 8.375 263/4 2000 13/4- 8 UN 1.938 4.375 9.125
5 1/8 10,000 1 1/8 - 8 UN 1.313 2.813 6.000 263/4 3000 2-8 UN 2.188 5.000 11.000
5 1/8 15,000 1 1/2- 8 UN 1.688 3.750 7.625 30 2000 1 5/8 - 8 UN 1.813 4.063 9.250
7 1/16 10,000 1 1/2- 8 UN 1.688 3.750 7.750 30 3000 1 7/8 - 8 UN 2.063 4.688 11.000
7 1/16 15,000 1 1/2- 8 UN 1.688 3.750 8.375 - - - - - -
7 1/16 20,000 2-8 UN 2.188 5.000 11.125 - - - - - -
9 10,000 1 1/2- 8 UN 1.688 3.750 8.500 - - - - - -
9 15,000 1 7/8 - 8 UN 2.063 4.688 10.1 25 - - - - - -
9 20,000 2 1/2- 8 UN 2.688 6.250 13.750 - - - - - -
  • FOOTNOTES* Tolerance on bolt length: +0.1 25/−0 in. for lengths up to 1 2 in. +0.250/ − 0 in. for lengths over 1 2 in.

API 6A Tap End Stud Bolt Length for 6B Flange Connectors with "R" Gaskets UNSC Series

API 6A Tap End Stud Bolt Length for 6B Flange Connectors with R Gaskets UNSC Series
Flange Size and Pressure Bolt Size and Thread Tap End Length* Nut End Length Length** Flange Size and Pressure Bolt Size and Thread Tap End Length* Nut End Length Length**
2 1/16 2000 5/8 - 11 UNC 0.761 1.563 3.375 7 1/16 2000 1 - 8 UNC 1.188 2.500 5.000
21/16 3000 7/8 - 9 UNC 1.042 2.188 4.375 7 1/16 3000 1 1/8 - 8 UN 1.313 2.813 5.625
2 1/16 5000 7/8 - 9 UNC 1.042 2.188 4.375 7 1/16 5000 1 3/8 - 8 UN 1.563 3.438 7.250
2 9/16 2000 3/4- 10 UNC 0.900 1.875 3.750 9 2000 1 1/8 - 8 UN 1.313 2.813 5.625
2 9/16 3000 1 - 8 UNC 1.188 2.500 4.750 9 3000 1 3/8 - 8 UN 1.563 3.438 6.375
2 9/16 5000 1 - 8 UNC 1.188 2.500 4.750 9 5000 1 5/8 - 8 UN 1.813 4.063 8.1 25
3 1/8 2000 3/4- 10 UNC 0.900 1.875 3.875 11 2000 1 1/4 - 8 UN 1.438 3.1 25 6.125
3 1/8 3000 7/8 - 9 UNC 1.042 2.188 4.375 11 3000 1 3/8 - 8 UN 1.563 3.438 6.625
3 1/8 5000 1 1/8 - 8 UN 1.313 2.813 5.250 11 5000 1 7/8 - 8 UN 2.063 4.688 9.250
4 1/16 2000 7/8 - 9 UNC 1.042 2.188 4.375 13 5/8 2000 1 1/4 - 8 UN 1.438 3.1 25 6.250
41/16 3000 1 1/8 - 8 UN 1.313 2.813 5.125 13 5/8 3000 1 3/8 - 8 UN 1.563 3.438 7.000
4 1/16 5000 1 1/4 - 8 UN 1.438 3.1 25 5.750 16 3/4 2000 1 1/2 - 8 UN 1.688 3.750 7.1 25
51/8 2000 1 - 8 UNC 1.188 2.500 4.875 16 3/4 3000 1 5/8 - 8 UN 1.813 4.063 8.000
5 1/8 3000 1 1/4 - 8 UN 1.438 3.1 25 5.625 21 1/4 2000 1 5/8 - 8 UN 1.813 4.063 8.000
5 1/8 5000 1 1/2- 8 UN 1.688 3.750 7.000 203/4 3000 2-8 UN 2.188 5.000 9.625
  • FOOTNOTES* Tolerance on tap end thread length: +0.063/− 0 in.** Tolerance on tap end stud length; +0.1 25/− 0 in.

What does ASTM A453 Grade 660 Class D require?

ASTM A453 Grade 660 Class D is solution treated at 1650 ± 25 °F [900 ± 14 °C] for 2 h min or 1800 ± 25 °F [980 ± 14 °C] for 1 h min and liquid quenched, then aged at 1325 ± 25 °F [720 ± 14 °C] for 16 h and air cooled, with a second age at 1200 ± 25 °F [650 ± 14 °C] for 16 h if needed to reach the properties (A453/A453M-17 Table 4). Table 5 requires up to 2½ in. [63.5 mm]: 130 ksi [895 MPa] tensile and 105 ksi [725 MPa] yield; over 2½ in. [63.5 mm]: 120 ksi [825 MPa] tensile and 95 ksi [655 MPa] yield; 15 % elongation, 18 % reduction of area and 248 to 321 HB (24 to 35 HRC) in both size ranges.

Class D does not require a stress-rupture test and is stamped NR in addition to the other required markings (8.2.1, 9.1). Each bolting component carries the grade symbol and class (660 D) and the thread type: M1 or M2 for machined threads, R1 or R2 for rolled threads, formed after (1) or before (2) the precipitation heat treatment (6.1.1, 9.1). The 35 HRC maximum matches the ISO 15156-3 (NACE MR0175) limit for UNS S66286. API 20F covers Grade 660 Class D for BSL-2 and BSL-3 bolting, and API 6A (21st edition) 8.2.3.6 cautions against Grade 660D on pressure-containing connectors in salt-air offshore or coastal service, or where equipment is washed with raw seawater. See the ASTM A453 660D (Class D) specification, ASTM A453 Grade 660 chemical composition and mechanical properties.

Make-up torque: API 6A Bolting Torque for Flanges (SI Units) and API 6A Bolting Torque for Flanges (USC Units).

Source: ASTM A453/A453M-17; API 6A 21st edition; API 20F; ISO 15156-3. Last reviewed .

Specifications
  • ASTM A453
  • ASTM A638
  • EN 10269
  • EN 10083-3
  • ISO 3506-5
  • DIN 267
Surface Treatments
  • Xylan 1070 / 1014 / 1400 / 1424
  • Xylar 2 / 101
  • SermaGard 1105 / 1280
  • Dacromet 320 / 500
  • TakeCoat 1000 Ceramic
  • Magnigard
  • MolyKote
Certifications
  • ISO 9001 - 2015 Certified
  • PED 2014/68/EC
  • NACE MR0175/ISO 15156-2
  • NORSOK M-650
  • DFAR
  • MERKBLATT AD 2000 W2/W7/W10
About Us